Handmade Diamond Tufted Headboard

Author: Kimberly J. Hayes | Categories: Headboard Diy comments
Black Diamond Tufted Headboard

Diamond tufted headboard – create a customized addition to the bed that reflects your taste and fashion sense, add elegance and style to a room’s decor. Measure the mattress. Place a quarter-inch piece of plywood on a hard, flat surface. Trace the paper template on the quarter-inch plywood with a pencil.

Cut the gable design out of plywood with a jigsaw and sand the rough edges of the plywood with sandpaper. Place the plywood end on a flat surface and place the 2-inch padding on top. Lift the upholstery of plywood and spray foam adhesive on the headboard. Place the plywood headboard, foam side down, on top of the batting and fabric, centered in the middle. Staple headboard in the marked locations using a staple gun, starting with the center dot that will make diamond for diamond tufted headboard.

Squeeze a dot of fabric glue in each stapled indentation, and press the buttons in the glue. Press the buttons in the glue for a minute or two until the glue has time to set. Tilt the headboard against the wall in the desired location. Fix the lower part of a flush mounted to the outer stud in outline, with the help of a screwdriver and the supplied screws. Raise the diamond tufted headboard against the wall and shoot the best flush mounts in the lower flush mounts.

RELATED:   Distinctive Tall Headboards King

Comments are closed.