White Queen Headboard With A King Size Bed

Author: Kimberly J. Hayes | Categories: Headboard Design comments
Leather White Queen Headboard

White Queen Headboard With A King-Size Bed – A king-size bed is 76 inches wide, while a queen-size bed is 60 inches wide. Therefore, white queen headboard about 16 inches narrower than a king headboard. Yet, with creativity and a little time at home improvement center, you can make the queen headboard work with a king-size bed. In fact, most modern steel bed frames accommodate both queen-size and king-size bed. And end attaches to the bed frame, making the end wall extension much easier.

Instructions to use white queen headboard with a king-size bed. Measure the width of the headboard and compare the width of your king-size bed frame. The difference in width must be compensated with wooden posts applied to the ends of the gable or intermittently along the face of the board. Each headboard is different. Decide how you want to use the service to make up the difference in width. Cut the post to a desired length that complements the height of the existing queen-size bed. You should be able to use two 6-by-8s, or 8-by-8s on any side or five 4-by-4s, evenly distributed over the headboard. Grind posts to match the finish of the existing queen headboard. If you extend the headboard with the 4-by-4s, cut end into 4 equal-width bits.

RELATED:   Wooden Shower Tray Footboard

Next steps to use white queen headboard with a king-size bed. Drill three pilot holes in each post, and trades on the gable, and see these pilot holes line up between the gable and abutted mail. By mail and neighboring headboard, screwing in and countersink the screws or drilling teams with the right diameter holes for the cam fastener system. If you use combs, install and tighten the cams. Add finials and caps to the ends of the services, and paint or stain the headboard to create a uniform color and finish of the piece. When the finish is dry, bed frame attached to the headboard.

Comments are closed.